Do-it-yourself basement waterproofing system
SquidGee Dry basement waterproofing system Dry up your wet leaky basement with the SquidGee™ Dry Basement Waterproofing System
Buy Basement Waterproofing Products Click Here

SquidGee Dry Installation Guide: Page 3

These easy to follow step-by-step instructions will guide you through every step of the installation process of the SquidGee Dry System.
Download a PDF version of the SquidGee Dry Installation Guide to print out and have beside you when installing the system. (Download the latest version of Adobe Reader)

See all of the installation steps in video: basement waterproofing installation videos

13. Install Corners

Install corners last

Inside corners are easy to install when dropped down from the top. Use a coarse sandpaper to rough up any vinyl to vinyl surfaces. Apply SquidGee SealOnce on both main sections and the bottom of the corner piece.

14. Seal Edges of the Corners

Seal edges of the corners

Sealing the edges of the Corners and caulking the bottom will insure there are no leaks.

See a video of this step

15. Caulk Floor Joint

Caulk floor joint

Caulk the floor joint with enough pressure to force some SquidGee SealOnce under the system. VERY IMPORTANT STEP to creating a watertight seal!

See a video of this step

16. Directing Water to a Floor Drain

Directing water to a floor drain

Be sure and check your local building codes before draining to a floor drain.

See a video of this step

17. Directing Water to a Sump Pump

Directing water to a sump pump

Draining to a Sump Pump in most communities is the proper method of disposing of ground water.

18. Paneling the Walls

Attach your 2"x 2" base plate to the wall 1/2" above the SquidGee Dry system. Run all furring strips down to the base plate. Panel only down to the base plate. Attach the base to the base plate to cover the SquidGee Dry™ system. Learn how to finish basement...