13. Install corners last

Inside corners are easy to install when dropped down from the top. Use a coarse sandpaper to rough up any vinyl to vinyl surfaces. Apply SquidGee SealOnce™ on both main sections and the bottom of the corner piece.

14. Seal edges of the Corners

Sealing the edges of the Corners and caulking the bottom will insure there are no leaks.

15. Installing a End Cap

Apply SquidGee SealOnce™ across the bottom and up the wall and down the edge of the baseboard. Set end cap in place and caulk all joining surfaces again.

16. Draining to a floor drain

Be sure and check your local building codes before draining to a floor drain.

17. Draining to a
Sump Pump

Draining to a Sump Pump in most communities is the proper method of disposing of ground water.

18. Paneling the walls

Attach your 2"x 2" base plate to the wall 1/2" above the SquidGee Dry™ system. Run all firring strips down to the base plate. Panel only down to the base plate. Attach the base to the base plate to cover the SquidGee Dry™ system.