Polyurea coating technology is a newer and more advanced method than traditional waterproofing and protective coating technologies.

It isn't a new technology, however. It has been in use for nearly three decades.

This technology relies on the reaction between an isocyanate and an amine mixture. It can be either aromatic or aliphatic. This rapid reaction can be completed in a matter of seconds. Therefore, it is necessary to use specialized mixing equipment and equipment for a special application crew.

Major advantages-properties of all Polyurea based products

  • Ultra-fast curing. Traditional coatings take longer to return to service or for further processing. The gel time takes only seconds and allows for foot traffic within a matter of minutes. This means that the facility can be returned to use in as little as one day.
  • Excellent chemical resistance and extraordinary mechanical properties like elongation and tensile strength, tear resistance, crack-bridging ability, and abrasion resistance. When it comes to physical properties, Polyurea is the best coating.
  • Application may cause sensitivity to humidity. Polyurea's hydrolytic stability means that relative humidity and residual moisture have little or no effect on the adhesion or coating performance.
  • Temperature variations can affect thermal stability. Weather changes have little effect on coating performance and adhesion properties.
  • Solvent-freeIt is made up of a 100% solids formulation. Polyurea products can be considered to be environmentally friendly.
  • Apply quickly with a two-component, high pressure, and temperature spray machine.
  • After curing, monolithic, seamless membrane. Polyurea membranes are resistant to high mechanical and chemical loads. These membranes can also be permeable to vapor, which prevents moisture accumulation.
  • Also applicable to vertical and curved surfaces, you can coat intricate architectural details and structures in any thickness you like without worrying about sagging.
  • The thickness of applications is almost limitless one go.
  • Good adhesion you can use various substrates (concrete and metals, as well as wood, etc.), even under extreme temperatures and high humidity.


Waterproofing Structures

Protecting against water damage is one of the major advantages of Polyurea as well as polyurethane. Water cannot penetrate the concrete or wood surface by creating a leak-proof barrier. This prevents water from absorbing into the underlying surface, such as concrete or wood, and can even be used to prevent rotting, rusting, or warping.

Be aware of the following areas:

The application of the correct waterproofing treatment to the environment is a major issue in construction. It should last for many years. These are some examples:

  • Foundations and basements
  • Landscape design with water
  • Wall-floor crevices

How to Waterproof Walls

Too often, water seeps through the crack between the wall and the floor. Rain on a porch or water from a factory lunchroom, liquids, and microorganisms can seep under the trim and behind walls. They can cause damage to the structure and create unhealthy environments.

ArmorThane can create a seamless membrane using chamfer molding attached to the floor and coating partway up walls. The cracks can be sealed by two little seams replacing the main one. You can also learn to attach outdoor siding to wood decks to prevent water from entering the wall.

Leak Repair in Basements/Foundations

It is important to determine the source of the leak and the extent of the flooding in the structure. This will help you decide which repair or preventive measures are most appropriate. First, repair cracks. Then, professional application of one of ArmorThane's polyurethane, Polyurea, or combination coatings to the outside, interior, or both is made. These spray-on coatings are strong enough to create a waterproof barrier that will prevent further deterioration.

Sealing the foundation and walls of the building during construction is the best option. This will ensure a smooth application and prevent future damage.


Weatherproofing to Increase Structural Strength

ArmorThane coatings with Polyurea make surfaces more resistant to severe weather like tornadoes, hurricanes, and straight-line winds. These powerful winds and ground shifts can easily break, crack, and bend wood, metal, and concrete. Polyurea bonds outdoor surfaces such as floors, walkways, and decks with high tensile strengths. The material absorbs impact and stretches to hold the structure together.

Polyurea protects against hail damage and flying debris during storms. Damage can be avoided or minimized by strengthening the surface.


ArmorFoam provides additional protection by strengthening walls and ceilings made of metal and wood structures. Closed-cell sprayed insulation fills cracks and crevices with foam. The foam then hardens to increase structural strength. This insulation is twice as energy-efficient as traditional insulation and has twice the R-value rating.




A strong foundation is a key feature of any home. It literally holds it up. Failure to properly seal or reinforce your foundation could lead to water damage and premature demise. Concrete, wood and other materials used in foundations are all vulnerable to the elements. You run the risk that your foundation will collapse and put occupants at risk if you don't apply polyurea protective coatings. ArmorThane provides a guarantee of safety for every foundation it sprays.

Many homes that are relatively new end up crumbling because they were not properly sealed. Unsealed foundations can quickly decay when they are paired with high-moisture environments. There were many excuses in the past. We didn't have as much information and polyurea coating was not widely available. General contractors in this day and age have few reasons to not use a protective coating when repairing or installing foundations. ArmorThane can help you with your foundation repair or installation.

WATERPROOFING YOUR FOUNDATION FOR NEW BUILDS

It's a low-pressure job to repair the work of another contractor. Someone else has already done it wrong, and you are just trying to make it right. A new-build residential or commercial contractor has a lot more responsibility. A faulty foundation could prove to be a disaster for your company's reputation in the future. Sealing the foundation is a crucial step to ensure the structural integrity of your new home or business.

There are many reasons water can get into your foundation. The most important is that moisture can buildup in concrete. This causes cement to deteriorate slowly and weakens the bond between it and other particulates, which give concrete its strength. Unless your project is high up on a hill, it will most likely be in direct contact with moisture. Unprotected foundations can slowly absorb moisture from the surrounding area, leading to foundation cracking quickly.

Even if there is no visible structural damage, it could be lurking in the background. A health problem could be the first sign that a foundation is not properly sealed. A foundation inspection may reveal that mold is growing in a homeowner's basement or on their first floor. You could be responsible for all repairs to the foundation and any health-related costs if you fail to properly seal it.

A foundation built well should last for many years. This is the truth that every contractor knows. After you have spent the time, labor and brainpower to create a solid foundation, you can protect it with our specialized foundation coatings. Our coatings are guaranteed to protect your foundations from any water damage.

WATERPROOFING TO REPAIR CRACKED FOUNDATIONS

Polyurea coatings were not common in the past to waterproof foundations, basements and pools. There are many opportunities for general contractors, pool builders, and mold remediation experts to work on these repairs. Your services will grow as you offer waterproofing polyurea coatings. Customers will be delighted to learn that cracks in the foundation don't mean they have to lose their house, pool or basement.

MAKE ArmorThane your SPRAY-ON WATERPROOF NATING PROVIDER

ArmorThane is the right choice for you if you work in general home construction, home renovation, and repair or pool installation. Our polyurea and urethane products are used in everything, from vehicle protection to armor. You get a proven, durable product that will last long after the job is finished. Call us today to discuss your foundation coating requirements!



Foundation settlement is a slowenduring, undaunted process that accumulates compound interest against your property value. If you do not address the underlying issue, I can guarantee you –


  •   The drywall cracks will get much worse
  •   Your sloping floors will slope at even more acute angles
  •   You may have worsening roof leaks from separating trusses
  •   Your sticking doors will get more laborious to open, and some windows will more than likely prove difficult even to budge
  •   Your property appraisal will dive  
  •   It will be improbable to sell your home for its original value
  •   Your family will be ashamed to have visitors over
  •   Your home might be considered unlivable by the county and get red-tagged, pushing you and your family out.


These are only a few of the reasons to repair your structure now! 

Similar to when you get a cavity-- structure settlement will not repair itself. And, when left neglected, what was when a little cavity can evolve into an incredibly uncomfortable, incredibly pricey root canal of a structure restoration plan.
It would assist if you took swift, immediate, and comprehensive action ASAP to guarantee what matters to you most-- comfort.


In this short article, we are going to discuss the 5 Reasons to Fix Your Foundation Now.

  1. To stop any further cosmetic/structural damage.
  2. So you can renovate at last.
  3. So you can offer your home for its amount.
  4. So you can get in line for the long waiting times.
  5. To get your peace of mind back.



1. Fix Your Foundation Now to Impede any Further Cosmetic/Structural Damage.

Structure settlement forces an incredible quantity of undue stress on your home's foundation. This energy is then moved up through the bones, intrinsic structure of the house, resulting in:

  1. Cracked drywall.
  2. Cooking area cabinets/counters separating from walls.
  3. Sloping floors (a sense of vertigo).
  4. Sticking doors and windows.


These are the timeless signs and symptoms of structure settlement. These signs and symptoms will deteriorate as time goes on, translating into:

  1. Bigger cracks in the drywall.
  2. Bowing/concaved drywall.
  3. More cracks in drywall.
  4. Kitchen cabinets/countertops with a substantial space at the wall.
  5. Floors that feel like you're strolling up and downhill.
  6. Windows that will not open at all/ doors that take some umph to handle.
  7. Leakages throughout the rainy season due to separating trusses (lead to lumber rot, ruined carpet, and fried home appliances).
  8. Larger, longer stucco cracks.
  9. Larger footing cracks (which can lead to water damage and rust out your footing).
  10. Chimney separation.

In short, the issues grow and more pricey to fix further down the road. In addition, the longer you wait, the deeper your home settles-- reducing our possibilities of returning your house to a higher optimum practical recovery level.
And, probably most significantly, it is crucial to address the root of the issue. Back to our cavity analogy, you can brush your teeth all you want after the damage is done. It's not going to repair the problem.


The ole' beautify and patch-and-paint will not repair structure settlement. That's an excellent way to burn through loads of money for nothing. Zilch. Nada.


The cracks will come back. The self-leveling floor substance you purchased is a momentary fix. Those doors you simply shaved down are useless if you ever choose to raise and stabilize your foundation.


Do not put time, money, and effort into brushing the tooth that is already rotten to the core-- it simply hurts.
Structure repair obstructs even more cosmetic/structural wear and tear and often returns negative symptoms and signs to typical.


Fractures are fitted back together. Windows and door frames are returned to the square. Slanted floors are releveled. It is, for all intents and purposes, a significant "healing procedure" for the home.


Again, the longer you wait, the more cosmetic/structural damages occur and the more difficult it is to fix it down the line.


2. Repair Your Foundation Now so you can Remodel Once and For All.


Is your house feeling dated? 

Attempting to keep up with your extra sister-in-law or the Joneses? 

Maybe you've been planning your ultimate luxurious bathroom remodel with a jacuzzi-jet bath tub and walk-in shower for the ultimate medspa experience?
Or maybe you wish to toss some juicy T-bone steaks out on the Traeger and knock back some Stone IPA with the kids on a brand-new deck?


The fact is-- house remodels, and home additions require to wait until after a house's foundation has actually been fixed.
Any remodeling or add-ons before a structure repair work are merely flushing cash down the drain. The drywall fractures will return. The new floor might separate. It's all going to burn. So, if you're all set to upgrade-- fix your structure now!
After your home has been raised to optimum useful healing and stabilized, then you can begin the renovation procedure:.
Update the kitchen.
Put brand-new windows in the living room.
Knockdown the walls between the moved-out kids' rooms for the ultimate game room.
Now is the time to renovate, particularly on the heels of COVID 19, lumber and supply prices continue to soar. According to USA Today, lumber prices have risen 252% in current months, and who understands when the bubble will pop.
If you wish to remodel on the cheap, you'll wish to hop in line for a structure repair ASAP. Purchase a remodel that will last and secure long-lasting equity in your house.

3. Remodel Now So You Can Sell Your Home for Full Value.


Today, the house market is hot! So hot we wrote a whole article dedicated to assisting you offer your home in this unmatched market: ewew Sell Your Home with Foundation Issues (2 Options).
Here at Dalinghaus, we want to ensure you get the very best possible bid for your house. Foundation concerns can take a big bite out of your equity, decreasing your home's price worth by 10 to 20 percent.
That can be as much as 70k in a house worth $350,000. And let's be real-- lots of homes in SoCal are quickly going for 500 to 600k-- which indicates possibly more money to lose.
The average expense of foundation repair with Dalinghaus Construction Inc. is $24,000. Click the link listed below to learn about your financing alternatives--.
Determine Your Monthly Payments with Hearth.
Even with our standard 70k loss circumstance, you could still depend on 46k after fixing your house's structure. And, in this market, numerous houses are going 50k above the asking rate.
Do not lose out on a big windfall because you're reluctant to invest 24,000 in your home, particularly when we provide to fund.
If you want to offer-- the time is now ... so, get in line.

4. Sign your Foundation Repair Contract Now to Get in Line.


This factor wraps up all of the other factors thus far. You want to go through the actions of structure repair to get in line so that:


You can stop additional cosmetic/structural damage.
You can redesign at last.
You can sell your home.
Unfortunately, structure repair is a long process. 


Foundation Repair Timeline:
Examination scheduling two weeks.
Inspection 1.5 hours (one day).
Proposal Interim 1 day to 6 Months.
Engineering 4-6 weeks.
Allowing 4-8 weeks.
Active Job Site Timeframe 1 week.
Overall 11-17 weeks.
* Note - this procedure can use up to 6 months, so intend on timeframe flexibility.


There are a helluva lot of steps when it pertains to foundation repair work-- there's a lot of bureaucracies. Here at Dalinghaus Incorporated Inc., we make use of a first-come, first-served design.
The earlier you reserve a structure repair work evaluation, the faster you can sign the proposal/contract, the earlier we can start the permitting/engineering/production process.
This process is type of like the military for our veterans-- we need to hurry and wait.
So, the faster you begin, the earlier we complete.


5. Get Foundation Repair Done Now To Get Your Peace of Mind Back.
Foundation failure puts all we have discussed above in jeopardy, from finances to family, to assurance. And, even worse, it interrupts your story. You're a mother. You're a dad. You're a working woman. You're hitting the books hard attempting to complete school or handling the 9-to-5 and church choir.
We are here supporting the artist, the engineer, the retiree wishing to live out their golden years in peace. We are here to support you.
You have dreams. You have objectives. You have ambitions. Structure failure is the last thing anyone requires-- ain't nobody got time for that (or the cash).
The truth is if we don't face our enemies head-on, they tower above us-- always simmering on the back burner, just negating perfect peace of mind.
You are the hero of your story!

ArmorThane is here to help you never settle!

If you are looking for a solution to your foundation problems, we recommend giving ArmorThane a call and find out about their protective coating solutions.





 


Failing to properly seal and reinforce the foundation of your new build could cause it to take on water damage and break down years before it otherwise would. Concrete, wood, and other materials that commonly makeup foundations are almost all susceptible to the elements. If you dont use polyurea protective coatings around your foundation, then you run the risk of your building collapsing and putting occupants in danger. With properly applied polyurea coatings from ArmorThane, you'll have peace of mind with every foundation you spray.



Polyurea is a hard resin that bonds to concrete. It is used in conjunction with concrete to prevent and mitigate water and mold damage. It'll help seal out water and keep mold from getting into the foundation, which will cause it to decay. The ArmorThane Polyurea protection will keep water from penetrating the foundation. The ArmorThane polyurea will also give your home a permanent gloss, without the use of a high-volume bleaching agent. There are a number of ways to achieve the gloss that ArmorThane Polyurea provides. A few examples are applying surface oil or surface wax before the concrete.


Anytime there is a building being constructed, there is a major build-out of the foundation. The foundation of your new build is one of the most precious areas because there is much that can go wrong with it. And any problems can cause the foundation to have to be replaced. It should be sealed to keep the rain out and minimize the effects of water. In most cases, the seal of choice is ArmorThane Polyurea coating. It is easy to seal and extremely easy to install.

With polyurea coating, you'll be looking at having your foundation reinforced. The quality of the polyurea coating will help to prevent it from eroding, meaning the exterior walls won't rot. It will be protected from freezing and decay, which means the exterior walls will be longer. The installation process is quick and painless. There are no special tools, surfaces, or methods to learn.

After the coating is applied, you'll notice your new foundation has a permanent gloss, with no need to reapply the polyurea coatings. While polyurea is very durable, there is a need for regular maintenance and application of the polyurea coating, not only to keep it looking good but to also prevent and mitigate any water and mold damage.

It is a very rewarding way to experience the benefits of a permanent, sparkling foundation. And the most exciting thing about the ArmorThane Permanent Finish is that it doesn't require any upkeep or reapplication. It will be a shiny foundation from the day you leave the builder's driveway. No matter how long it takes to install and prepare your home, the foundation will be shiny. Whether you are replacing a section of foundation or are simply applying a coat of polyurea, the ArmorThane Permanent Finish will provide lasting, brilliant protection for your home. For the first time, there is a superior alternative to the traditional exterior polyurea coating. 
The polyurea coating is not easily damaged by water and mildew, meaning your foundation will not erode. The polyurea coating will resist mildew, meaning your foundation will last longer. The polyurea coating is also an eyesore, meaning the area surrounding your new, powder-coated foundation is bright and clean, however, it is covered with mildew-resistant polyurea particles. So, the area surrounding your home will be sparkling and well-lit, but you have the choice of a polyurea foundation that remains even after the house is built.

Because the polyurea finish is applied to your new house as soon as possible after it is built, not every home will have this choice. Each builder has its own schedule for when to apply the finish. The only way to ensure you are getting the polyurea coating is to do an inspection of your new foundation and the surrounding area before you build. If there are very bright areas, the finish should be applied. If there are very dark areas, it should be left alone. If you get the polyurea coat, the entire area surrounding your house should be sealed with a polyurea primer. And, for safety reasons, never touch a primer-coated area with your bare hands.





A strong foundation is one of the most crucial qualities of a home, as it literally holds the house up. Failing to effectively seal and reinforce the structure of your new development could trigger it to take on water damage and break down years prior to it otherwise would. Concrete, wood, and other materials that commonly makeup foundations are almost all vulnerable to these aspects. If you do not use polyurea protective coatings around your foundation, then you run the risk of your building collapsing and putting occupants in danger. With properly used polyurea coatings from ArmorThane, you'll have peace of mind with every structure you spray.

Among the factors that you see many reasonably new houses failing to the point of collapse is since they weren't correctly sealed in the first place. When you combine unsealed structures with a high-moisture environment, the result is a quickly decaying structure. In the past excuses could be made, we didn't refer to as much as we do now and resources like polyurea coating weren't also known or utilized. For basic professionals operating in today's day and age, there are few reasons for not using a protective coating during structure installation or repair. ArmorThane is here as a supplier of polyurea coatings to help you take care of the job.

WATERPROOFING YOUR FOUNDATION ON NEW BUILDS
Fixing another contractor's work is a low-pressure job-- somebody else currently messed up, and you're simply attempting to make it better. Nevertheless, being a new-build commercial or property contractor means that there's a little less breathing space, and a faulty foundation showing up in a structure simply a couple of years down the road could be ravaging to the long-term reputation of your business. Aside from constructing the structure appropriately, sealing it might be the most crucial thing you can do for the structural stability of the new home or business.

Water entering your foundation is a threat for a variety of reasons, the most critical being that wetness can build up in the concrete. This gradually deteriorates the bonds between the cement and the rest of the particulates that provide the concrete its strength. Unless your project stands at the top of a hill in a location with almost no humidity, then it will likely come into contact with big quantities of wetness at some time. Most unprotected structures will gradually absorb the moisture around them, typically causing the structure to begin crumbling before anybody even notices.

Even if you don't see structural damage, it might be hiding behind the scenes. The first sign of a home or organization with an improperly sealed foundation might come in the type of a health issue. Some homeowners might see mold sneaking into their basement or very first flooring, and an examination could expose that the structure is the source of the mold. If you didn't appropriately waterproof and seal the structure, then you might not just be on the hook for any repair work that the home or business owner may need, but any health-related expenses also.

Any contractor worth their title understands that a well-built structure must stand up for years to come. Once you've put in the time, labor, and mental capacity that it requires to design a strong foundation, then you can ensure it doesn't go to waste with our specialized structure coatings. We're confident that our coatings will assist make certain your foundations withstand any of the damage that water could trigger.

WATERPROOFING FOR CRACKED FOUNDATION REPAIR
A couple of years ago, using polyurea coatings to waterproof foundations, basements, and swimming pools wasn't necessarily commonplace. This means there are lots of chances for basic professionals, swimming pool installers, and mold remediation professionals to discover operate in these repair work. You'll be broadening your toolbox of services when you offer polyurea coatings for waterproofing, and your clients will be thrilled to discover that they do not need to lose their house, pool, or basement because of a split structure.

MAKE ArmorThane YOUR SPRAY-ON WATERPROOF COATING PROVIDER
If you're working in the industry of basic home contracting, home remodeling and repair, or pool installation, then you have a lot of factors to take on ArmorThane as your provider of polyurea protective coatings. We make polyurea and polyurethane items for a variety of organizations throughout the world, and they're used in everything from car protection to body armor! With us, you get a resilient, tested product that will hold up long after the task is done. Contact us today for all your foundation coating needs!

 



If you've ever had to deal with a damp and musty basement, it's not pleasant. However, basements are expected to be wet, right?

Well, when that pesky dampness or small leakage becomes something bigger, or your basement is allowing more than just a little water each time it rains, then it's time to act.

You do not require to instantly go out and discover a company that concentrates on waterproofing basements though. With the ideal industrial coating from a reputable supplier, you can take matters into your own hands.
Not all basements are produced equivalent
And the kind of walls you have in your basement will determine how and why it leaks.

Put concrete walls - These typically leak along the joint between the flooring and the wall. High hydrostatic pressure outside the foundation can trigger seepage through even the most solid concrete walls. It can also require water into the basement along the crack that exists between the flooring and the walls.

Also, any fractures that form in poured concrete walls are ideal pathways for water to enter the basement.

Cinder block walls - Like poured concrete walls, these will likewise leak along the floor/wall joint. The mortar joints between private cinder block also have the possible to leakage. If there's pressure versus a cinder block structure, it can deteriorate the mortar joints. This causes fractures that enable water seepage.

Likewise, the hollow cores in cinder block can fill with water which, in turn, will cause the foundation to leakage for some after the soil outside the house has dried.

Clay tile walls - These walls are sometimes found on historic houses and the most typical place for a leak is the floor/wall joint. The mortar joints between clay tiles is likewise a commonplace for seepage.

Similar to cinder blocks, clay tiles likewise have hollow cores that can become filled with water. This can produce a tank of water that can leakage into the basement with time.

It must be kept in mind that clay tile is brittle and more quickly harmed than other masonry products, so extra care needs to be taken when working on this kind of wall.
Waterproofing basements might seem like a big job
It might not be as tough as you believe though. Utilizing a polyurea coating is your first line of defense in drying your damp basement and can be carried out in just a couple of easy actions:
1. Prepare the surface.
Getting the very best outcomes and the most from the coating are dependent on this primary step. Be sure to check out all label directions prior to starting taking on any talks that involve waterproofing basements.

Run a test spot first in a location where it will not reveal. That way, you'll know for sure if there will be proper adhesion and drying so that you'll be satisfied with the product.

The wall surface needs to be tidy and dry. Sand down any rough wood surfaces and get rid of loose or peeling paint with a wire brush.

If you're working with concrete surfaces, you can prepare them by using a disc mill and carborundum disc. Or you can sandblast them.

If the concrete is loose or falling apart, repair it and enable it to cure entirely. If there's mildew, you'll need to provide it a power cleaning. And if it's brand-new concrete, enable it to treat for at least 30 days before applying a coating.
2. Prime the surface, fill fractures, and apply seam tape.
If there are any joints or cracks that are broader than 1/8 inch, fill them with a trowel-grade coating and filler. In order to avoid future breaking and leaking, you'll require to seam tape all joints and cracks. Use a self-adhesive, high-strength, contouring seam tape that is pliable so it is simple enough to form with your fingers.

Once the joint tape is put over a primed surface, it is nearly difficult to eliminate. So for the best adhesion, prime all surfaces prior to using the seam tape.

Also, do not substitute asphalt sealers. They do not serve to waterproof, as asphalt simply drifts over moist surface areas.

Mask delicate areas before beginning.

Drying the basement wall out totally before beginning is ABSOLUTELY necessary. You can utilize a propane space heater or lease - or perhaps buy - a building space heater.

As whatever dries, enable correct ventilation. Waterproofing basements when they are damp will not work.

And remember that low-temperature levels and high humidity might need increased drying and/or curing time.
3. Application - routine and heavy-duty.
Your polyurea coating from ArmorThane will be sprayed on. Ensure you follow the directions properly so the chemicals are properly mixed.

Apply the coating up until you have a constant, unbroken seal throughout the whole surface that is at least 30mils thick. That's about the density of a penny.

Using 2 coats will cover and waterproof all of the surface areas in your basement, you're much better off with more. Particularly if you're handling extreme water leaking issues.

4. Safe cleanup, storage, and disposal.
Tools and little spills can be tidied up with water. Any unused item can be stored in its initial container. Make certain that it's tightly sealed and kept at 45 to 85 degrees and avoid freezing.

Anything that's being gotten rid of needs to remain in accordance with state and federal and local requirements; thinning it with water up to 10%.

If you've had success with waterproofing basements using industrial coating, please do not hesitate to share your story!